Igawara Industrial and Service Trading Pte Ltd
Products

Browse by Product groups:

Product A group
Tubes, Pipes, Plates,
Sheets and Coils

Product B group
Forgings, Fittings & Flanges

Product C group
Dish Heads,
Structural shapes

Product D group
Instruments, Valves,
Mechanical equipments

Product E group
Aerospace materials

 

Product F group
Mineral Mining &
Mining Equipment

Product G group
Grounding Devices

Product H group
Oil Country Tubular Goods
(Casings, Tubings & Drill Pipes)

Product A group

Tubes, pipes, plates, sheets and coils


We supply full range of seamless and welded tubes for Boilers, Condensers, Superheaters, Reheaters, Coolers and Heat exchangers. Available grades at present include but not limited to following:



AVAILABLE MATERIALS RANGE
(ASTM/ASME, JIS, EN, BS,GB)


  • Carbon steel
  • Low Alloy Steel
  • Low temperature service
  • High temperature service
  • Chrome - Molly
  • Stainless and Duplex Stainless Steel
  • Copper & Copper Alloy
  • Nickel Alloy
  • Titanium Alloy
  • Composite (bimetal) materials

AVAILABLE TYPES


  • Straight Tubes
  • "U" Tubes
  • Longitudinal Finned
  • Helical/Spiral Finned
  • Embedded, Extruded, 'L','LL' Finned
  • Square Finned
  • Oval Finned
  • Casting Finned
  • Integral Low Finned
  • Stud Tubes
  • Omega
  • Humped
  • Rifle Groove


Seamless and welded pipes of Ferrous and Non-Ferrous grades meeting most stringent standard worldwide.



AVAILABLE TYPES & SIZE RANGES


  • Seamless (Hot Drawn, Hot Extrusion)
  • 2" up to 24"NB
  • Seamless (Cold Drawn)
  • 6mm up to 406mm OD
  • Seamless (Trapezium)
  • 12"NB up to 30"NB
  • Welded (ERW)
  • ½"NB up to 24"NB
  • Welded (E.Fs.W)
  • 16"NB up to 108"NB
  • Welded (Spiral SAW)
  • 16"NB up to 96"NB
  • Welded (SAW – UOE, JCO)
  • 16"NB up to 48"NB
  • Welded (SAW, E.Fs.W - Bending Roll)
  • 6"NB up to 120"NB

AVAILABLE MATERIAL GRADES
(ASTM/ASME, JIS, EN, BS,GB)


  • Carbon steel for Process and Structural application
  • High strength Carbon steel for Process and Structural application
  • Quenched and tempered steel
  • Low temperature service
  • High temperature service
  • HIC (Hydrogen-Induced Crack) resistance: NACE TM02-84
  • SSC (Sulfide-Stress-Corrosion Crack) resistance NACE MR01-75
  • Chrome – Molly
  • Stainless, Duplex, super-Austenitic Steel
  • Copper and Copper Alloy
  • Nickel Alloy
  • Titanium Alloy
  • Clad Steel (Hot roll bonded type & Explosion bonded type)


Standard size or tailored size in accordance with equipment/tankage cutting plan, from Mill indent with long lead time with specific project technical conditions to ex-stock item with rush delivery deadline. Additional testing such as Through Thickness Test to Z15 ~Z35, HIC test, Ultrasonic can be performed at the request of customers.



MATERIALS RANGE
(ASTM/ASME, JIS, EN, BS,GB)


  • Carbon steel for general application
  • High Yield structural steel, 355 Mpa, 500 Mpa, 690Mpa
  • Shipbuilding grade A to high yield EH36.
  • Quenched and tempered steels
  • Low temperature service
  • High temperature service
  • Chrome - Molly Steel
  • Atmospheric corrosion resistance
  • Sulphuric-acid dew-point corrosion resistance Steel (S-Ten)
  • Abrasion resistance
  • HIC (Hydrogen-Induced Crack) NACE TM02-84 resistance
  • SSC (Sulfide-Stress-Corrosion Crack) NACE MR01-75 resistance
  • Lamellar tearing resistance (Z test)
  • Stainless and Duplex Stainless
  • Copper and Copper Alloy
  • Nickel Alloy
  • Titanium Alloy
  • Clad Steel, Hot Rolled Bonded type and Explosion bonded type


HR, CR, GI, Coated in Low carbon steel, HSLA steel, Silicon steel, Stainless Steel (3xx, 4xx series), Nickel alloy and Titanium. We also supply precision rolled narrow strip from 0.1mm thick in Stainless, Duplex, Nickel and Titanium grade.



Back to Top

Product B group

Forgings, Fittings & Flanges




AVAILABLE MATERIALS RANGE
(ASTM/ASME, JIS, EN)


  • Carbon and Low Alloy
  • Low Temperature
  • Ferritic Alloy
  • Stainless, Duplex and Superduplex
  • Aluminium and Aluminium Bronze
  • Admiral brass and Aluminium Brass
  • Cupro Nickel
  • High Nickel and Super Alloy
  • Titanium
  • HIC & SSC Tested Steel
  • Clad Steel

AVAILABLE TYPES


  • LWN, H, S ,V1~ V3 with or without Saddle
  • Tailor-made per drawing.
  • Blind Disc
  • Complete drilled, grooved and partition slot machined TubeSheet


AVAILABLE SIZES


  • Seamless flange up to 6m diameter
  • Nozzle up to 20 metric ton per piece


From standard size meeting common international specification to tailor-made fittings of extreme larger and thick elbows, reducers, tees, caps, lateral and stub ends meeting most sophisticated material and dimensional specifications.



AVAILABLE MATERIALS RANGE
(ASTM/ASME, JIS, EN)


  • Carbon steel
  • High strength steel
  • Quenched and tempered steels
  • Low temperature service
  • High temperature service
  • HIC (Hydrogen-Induced Crack) resistance
  • SSC (Sulfide-Stress-Corrosion-Crack) resistance
  • Chrome - Molly
  • Stainless and Duplex Stainless
  • Copper Alloy
  • High Nickel Alloy
  • Titanium Alloy
  • Clad Steel


We supply a full range of forge fittings of a variety of steel types and sizes which play an important role in fulfilling the total needs of our customers in our total pipe package sales.



AVAILABLE MATERIALS RANGE
(ASTM/ASME, JIS, EN)


  • Carbon and Low Alloy
  • Ferritic Alloy
  • Stainless, Duplex and Superduplex
  • Aluminium and Aluminium Bronze
  • Admiral brass and Aluminium Brass
  • Cupro Nickel and Copper Nickel
  • High Nickel and Super Alloy
  • Titanium
  • HIC & SSC Tested Steel

AVAILABLE TYPES


  • Socket Weld
  • Threaded
  • Elbow
  • Tee
  • Cross
  • Lateral
  • Coupling
  • Union
  • Cap
  • Plug
  • Nipple (pipe, swage)
  • Reducer insert
  • O-let's(weld, SW, thread)
  • Nipolet
  • flange O-let


From standard flanges meeting common material and dimensional specification to special tailor-made flanges of a variety of steel types and sizes meeting the most stringent project requirement.



AVAILABLE MATERIALS RANGE
(ASTM/ASME, JIS, EN)


  • Carbon and Low Alloy
  • Ferritic Alloy
  • Stainless, Duplex and Superduplex
  • Aluminium and Aluminium Bronze
  • Admiral brass and Aluminium Brass
  • Cupro Nickel and Copper Nickel
  • High Nickel and Super Alloy
  • Titanium
  • HIC & SSC Tested Steel
  • Clad Steel

AVAILABLE DIMENSIONAL SPECIFICATIONS


  • ANSI, MSS, AWWA, API, ASME
  • JIS, JPI, BS, DIN, GOST, KS
  • LWN, `H' & `S' TYPE
  • TEMA



Back to Top

Product C group

Dish Head, StructuRal shape


We supply both Seamless and Welded construction by Hot forming or Cold forming process.



PRODUCTION RANGE OF FORMED HEADS


Type: Semi-Ellipsoidal 2:1, Torispherical, Flat Head, Hemi-head, Concentric Conical Head, Eccentric Conical head
Max. Diameter: 12,000MM by Cold Spin process (Max. Diameter of Seamless Head; 4,500MM)
Max. Thickness ever supplied: 254MM


MATERIAL RANGE


  • Carbon Steel ASTM A36, A283-C, A572-50, JIS SS400
    As rolled or Normalized Carbon Steel, ASTM A285, A515, A516, BS151-223-490B, EN P265GH, JIS SB410
    Quenched and Tempered steel, ASTM A537, JIS SPV 450, SPV490
    Low Alloy Steel, ASTM A203, A204, A387, A724,
    Nickel, Molybdenum, Chromium and other grades.
  • Stainless Steel
    Austenitic Stainless Steel
    Ferritic Stainless Steel
    Martensitic Stainless Steel
    Austentic-Ferritic (Duplex) Stainless Steel
  • Nonferrous Metal
    Aluminium Alloy: Alloy 5083 , Alloy 6061
    Copper: Deoxidated Copper, Naval Brass, Aluminium Bronze, etc.
    Nickel: Copper Nickel, Alloy 200, 400, 600, 625, 800HT, 825, 904L, C276, C22, etc.
    Titanium: Unalloyed Grade 1, Grade 2, Grade 7, Grade16, etc.
  • Cladding Steel (Hot Rolled Bond and Explosion Bond)
    Carbon and Low Alloy Steel + Stainless Steel
    Carbon and Low Alloy Steel + Nonferrous Metal (Al, Ti)
    Stainless Steel + Nonferrous Metal (Al, Ti)


Rolled beam, channel, angle, flat bar, round bar for plant construction, infrastructure structure, Bridges and non-pressure parts of pressure equipments. Dimension standard range from Imperial Series (Inch size), Metric Series & Euro Norm series (HEA, HEB UPN, IPE, PFC,U etc) and welded build-up beam for size above 600mm (24") or non-standard type.

Our strong international connections with mills and stockist enable us to supply assortments of structural shape in accordance with customer demand in project specification and project schedules.



Back to Top

Product D group

INSTRUMENTS, VALVES, MECHANICAL EQUIPMENTS

In 2006, Igawara Industrial Service & Trading Pte Ltd had set up the Instruments/Valves/Mechanical Equipments department to compliment to the scope of material supply to the oil & gas, petrochemical, chemical and power plant and marine industries.

The Products and equipments include:




  • Pressure and Temperature Gauges, Differential Pressure Gauge.
  • Thermo-sensor and Thermo-well,
  • Temperature transmitter
  • Pressure switch, Temperature switch.
  • Level Gauge, Level switch, Pressure switch
  • Instrument and Pneumatic Control Panel.
  • Instrument valve, tubing and fittings
  • Various types of flow meter, orifice plate and flanges


Industries served: We serve industries like Marine, Oil & Gas, Petrochemical, Power, LNG separation & Terminal,
Waste Water treatment.

In order to meet our customers requirement, we are closely working with many "A" brand valves makers around the world to enable us to cover full range of valves which is required for various sectors.

Our specialized sales engineers will be able to provide extensive services & solutions for any combination & contingencies.



Type of Valves: Gate, Globe, Check, Butterfly, Ball & Cryogenic
Operation: Manual & Remote Control
Special Range: Double Bleed & Block, Through Conduit, Pressure seal Bonnet
Standards: API 6D, API 6A, DIN, ANSI, BS, JIS
Size range: From 3\8” ~ 60 “ ( bigger size as per customer requirement can also be supplied )
Pressure Class: ANSI 150 ~ 2500, API 1000psi ~ 10000psi, DIN PN 10 ~ PN160, JIS 5K ~ 30K
End connection: Screw End, Flange End, BW, SW
Material: Cast Iron, Ductile Cast Iron, Carbon Steel ( WCB, LCB ), Carbon Moly ( WC1, WC6, WC9, C5, C12),
Stainless Steel ( CF8, CF8C, CF8M, LC3 ), Bronze, Al-Bronze, Ni.Al Bronze, Inconel, Monel, Hastalloy, Incoloy, Titanium




  • OEM generator, Pump, Compressor
  • Filters, Strainer
  • Cable ladder and tray




Oil, Chemical, Cryogenic(LNG)
Land Loading Arms


  • Standpost
  • Vapor Inlet
  • Liquid Inlet
  • Liquid Inboard Arm
  • Liquid Balance Spring Cylinder
  • Liquid Outboard Arm
  • Liquid Shut off Valve
  • Liquid Replacement Valve
  • Liquid Outlet
  • Vapor Outlet
  • Vapor Replacement valve
  • Vapor Shutoff Valve
  • Vapor Outboard Arm
  • Vapor Balance Spring Cylinder
  • Vapor Inboard Arm


Oil、Chemical、Cryogenic(LNG)
Marine Loading Arms


  • Apex Sheave
  • Apex Swivel Joint
  • Inboard Arm
  • Inboard Arm Support
  • Inborad Arm drive
  • Couterweight
  • Out board drive
  • Cable Sheave
  • Locking Device
  • Connection Flange
  • Drain inlet
  • Base plate
  • Riser
  • Slewing Drive
  • Removable Elbow
  • Triple Swivels Assembly
  • Outboard Arm
  • Outboard Arm Support



Back to Top

Product E group

AEROSPACE MATERIALS

IGAWARA - AEROSPACE MATERIALS DIVISION's vision is "to become first choice when specialty materials required". We are one of few holders of AS 9120A certification in Singapore. This accreditation is a benchmark to achieve a status as a global recognized and accepted Supplier, Stockist & Distributor of raw materials & parts to manufacturers & OEM's of the aerospace industry. This Standard addresses chain of custody, product safety, reliability leading to complete traceability, control of records, proper batch management and evidence of conformity. As we engage the most qualified professional staff in aerospace industry, our business has been growing rapidly and we have been supplying to several clients in China, India and SE Asia.

Its qualified materials engineers would be attending your needs and suggest you valuable methods to fulfil your need. Its strength always lies in being part of solution to your difficult problems in this supply chain.

Igawara has capabilities to provide value added services like cutting, heat treating, ensuring staggered deliveries for your projects need.

It focuses on supplies of Stainless Steels, Alloy Steels, Aluminum Alloys, Copper Alloys, Titanium alloys, Tool Steels, Ni Alloys & Cobalt- Cr Alloys in the form of Bars, Rods, Wires, Tubes, Pipes, Sheets, Plates, Forgings, Cast plates, Coils, Strips & Slabs to AMS, ASTM, Federal Specifications, EN, BS, DIN and Russian Specifications.



Back to Top

Product F group

Mineral Mining & Mining Equipment

Our division in mining started trading in bauxite and thermal coal in 2003 and 2006 respectively. In 2006, we also invested in our own chrome mining facility spanning a land area of 4500 hectares in Sulawesi, Indonesia. Currently, we are representing a full range of mining equipment from reputable manufacturers. These include damper trucks, excavators, coal road header, coal shearer, scraper conveyor, hydraulic support for the underground coal tunneling, open pit mining equipment etc.



Back to Top

Product G group

Grounding Devices

We supply a new technology break through grounding product to replace current Pure copper or copper steel cored grounding device. This new product has life span up to 45 years , much longer than existing design yet at lower product, installation and maintenance cost. Due to superior advantages over existing designs, several multi-billion mega petrol chemical, oil, gas and tank farm projects etc have been using them since 2006. The products pass most stringent test from ILAC-MBA, CMA, CAL, CNASA.



EXPERIENCE LIST


  • CNPC Sichuan Pengzhou 10million tons /year(200,000 barrels per day)refinery
    combine with 800 thousand tons /year Ethylene integral project 2009


  • CNPC Daqing petrochemical 1.2million tons per year ethylene plant 2010

  • Sinopec Maoming Branch 18million tons (340,000 barrels per day) per year
    Gasoline quality upgrading projects 2011


  • Sinochem Quanzhou 12million tons refinery per year(240,000 barrels per day) 2012

  • Korea Lixing chemical project in China 2010

  • Sinopec Yanshan branch and Mitsubishi chemical BPA/PC project in Beijing 2010



Back to Top

Product H group

Oil Country Tubular Goods (Casings, Tubings & Drill Pipes)




CASING


We supply full range of seamless casing and coupling as
per API SPEC 5CT & 5B.

Casing grade: H40, J55, K55, M65, L80, C95, N80, C90, T95, P110, Q125
Casing OD: 4-1/2~20" (114.3-508mm)
Casing WT: 0.205~0.875" (5.2-22.2mm)
Thread Type: P: Plain end S: STC L: LC B: BTC E: XC

Also can also supply Non-API casing and premium thread connections according to client's requirements.

TUBING


We supply full range of seamless tubing and coupling as
per API SPEC 5CT & 5B.

Tubing grade: H40, J55, L80, N80, C90, T95, P110
Tubing OD: 1-1/20~4-1/2" (26.67-114.3)
Tubing WT: 0.113~0.63" (2.87-16)
Thread Type: P: Plain end N: NU U: EU I: IJ

Also can supply Non-API tubing and premium thread connections according to client's requirements.

We supply full range of drill pipe as per API SPEC 5DP & API RP 7G.



Drill pipe grade: E75, X95, G105, S135
Drill pipe OD: 2 3/8-6 5/8" (60.3-168.3mm)
Drill pipe WT: 0.254-0.5" (6.45-12.7mm)
Thread Type: NC26, NC31, NC38, NC40, NC46, NC50, 5 1/2 FH, 6 5/8FH
Internal Coating: TK34, TK34P, TC2000, DPC, PA-200
Hard Banding: ARNCO 100XT, ARNCO 200XT, ARNCO 300XT


Also can supply Non-API drill pipe and premium thread connections according to client's requirements.

We supply full range of integral and welded heavy weight drill pipe as per API SPEC 7-1 & API RP 7G.



HWDP OD: 3 1/2-6 5/8" (88.9-168.3mm)
HWDP Material: Integral AISI4142H-AISI4145H
Welded tool joint AISI4142H-AISI4145H, pipe body as per client's required.
Thread Type: NC38, NC40, NC46, NC50, 5 1/2FH, 6 5/8FH
Internal Coating: TK34, TK34P, TC2000, DPC, PA-200
Hard Banding: ARNCO 100XT, ARNCO 200XT, ARNCO 300XT


Also can supply Non-API HWDP and premium thread connections according to client's requirements.

We supply full range of drill collar as per API SPEC 7-1 & API RP 7G.



Drill Collar OD: 3 1/8-11" (79.4-279.4mm)
Thread Type: NC23, NC26, NC31, NC35, NC38, NC44, NC46, NC50, NC56, 6 5/8REG, NC61, 7 5/8REG, NC70, NC97,
8 5/8REG
Drill Collar Material: AISI4142H-AISI4145H
Hard Banding: ARNCO 100XT, ARNCO 200XT, ARNCO 300XT


Also can supply Non-API drill collar and premium thread connections according to client's requirements.

We can supply full range of square and hexagonal kellys as per API SPEC 7-1 & API RP 7G



SQUARE KELLY


Square Kelly OD: 2 1/2-5 1/4" (63.5-133.4)
Square Kelly Material:AISI 4145H
Thread Type:
Box connection: 6 5/8REG, 4 1/2REG
Pin connection: NC26, NC31, NC38, NC46, NC50,
5 1/2FH, NC56

Also can supply Non-API square kellys and premium
thread connections according to client's requirements.

HEXAGONAL KELLY


Hexagonal Kelly OD: 3-6" (76.2-152.4mm)
Hexagonal Kelly Material: AISI 4145H
Thread Type:
Box connection: 6 5/8REG, 4 1/2REG
Pin connection: NC26, NC31, NC38, NC46, NC50,
5 1/2FH, NC56

Also can supply Non-API hexagonal kellys and premium
thread connections according to client's requirements.



Back to Top